“Rule of three” is the traditional name for solving a proportion with one unknown value. You use it when you scale a recipe, work out fuel costs, read a map scale, estimate how long a job will take, and on a lot of standardized test questions. The arithmetic is short; what trips people up is the setup. Before you write anything down, one question decides everything: are the quantities directly or inversely proportional?

Directly and inversely proportional quantities

  • Direct: when one doubles, the other doubles; when one halves, the other halves. The ratio between them is constant. Example: amount bought and total price, as long as the unit price does not change.
  • Inverse: when one doubles, the other halves. The product is constant. Example: speed and travel time over the same distance, or number of faucets and the time to fill the same tank.

In the formulas below, xx and yy are the two quantities, and the subscripts 1 and 2 mark the known situation and the new one.

y1x1=y2x2x1⋅y1=x2⋅y2\frac{y_1}{x_1} = \frac{y_2}{x_2} \qquad\qquad x_1 \cdot y_1 = x_2 \cdot y_2
Left: direct proportion (constant ratio). Right: inverse proportion (constant product).

A quick test settles it: imagine one quantity doubles and ask what happens to the other. If it doubles too, the relationship is direct. If it halves, it is inverse. If it changes some other way (or not at all), it is not proportional, and the rule of three does not apply.

Simple direct rule of three

A simple rule of three has only two quantities and one unknown. When the relationship is direct, you can cross-multiply or, usually safer, find the value of one unit and multiply.

Worked example: 3 pounds of coffee cost $24. How much do 5 pounds cost?

  1. Quantities: weight and price. More coffee, proportionally higher price: direct.
  2. Set up the proportion between the two situations, weight on top and price below.
  3. Cross-multiply: 3 times x equals 5 times 24, which is 120.
324=5x  ⇒  3x=120  ⇒  x=40\frac{3}{24} = \frac{5}{x} \;\Rightarrow\; 3x = 120 \;\Rightarrow\; x = 40
Direct proportion between the weight and the price of coffee.

Check: one pound costs 24 ÷ 3 = $8, and 5 × 8 = $40. Both routes agree. Going through the unit price is the same calculation in a different order, with one advantage: you can see what every number means, which makes setup mistakes easier to spot.

$243 lb$405 lb
Coffee price: 3 lb for $24 and 5 lb for $40, always $8 per pound.

Simple inverse rule of three

When the relationship is inverse, the usual cross-multiplication gives the wrong answer. Use the fact that the product does not change instead: the total work, the distance or the volume of the tank is the same in both situations.

Worked example: 6 bricklayers build a wall in 10 days. How many days do 4 bricklayers need for the same wall?

  1. Quantities: number of bricklayers and days. Fewer workers, more days: inverse (assuming everyone works at the same pace).
  2. In an inverse relationship the product is constant: 6 workers for 10 days is 60 worker-days of work.
  3. Set the products equal and solve.
6⋅10=4⋅x  ⇒  x=604=156 \cdot 10 = 4 \cdot x \;\Rightarrow\; x = \frac{60}{4} = 15
The total work, 60 worker-days, is the same in both situations.

Check: 4 × 15 = 60, the same total as 6 × 10. The answer also makes sense: with fewer people the job takes longer. Had you set it up as direct, you would get 6/10 = 4/x and x ≈ 6.7 days, meaning fewer people finish sooner. That absurd result exposes the wrong setup, which is why you should always test whether the answer makes sense.

2468101251015202530bricklayersdaysdays = 60 ÷ workers
With the work fixed at 60 worker-days, doubling the crew halves the time: the curve of an inverse relationship.

Compound rule of three

With three or more quantities, compare each quantity with the one you are looking for, one at a time, holding the others fixed. The unknown equals the known value times one ratio per quantity: new value over old value when the relationship is direct, and the flipped ratio when it is inverse. No arrows or memorized diagrams needed.

x=v⋅a2a1⋅b2b1⋯x = v \cdot \frac{a_2}{a_1} \cdot \frac{b_2}{b_1} \cdots
v is the known value; each fraction compares a quantity's new value with its old one, flipped if the relationship is inverse.

Worked example: 8 machines make 1,200 parts in 5 days. How many parts do 12 machines make in 3 days?

  1. Unknown: parts. Known value: 1,200.
  2. Machines and parts: more machines, more parts in the same time (direct). Ratio 12/8.
  3. Days and parts: fewer days, fewer parts with the same machines (direct). Ratio 3/5.
  4. Multiply the known value by both ratios.
x=1200⋅128⋅35=1200⋅1.5⋅0.6=1080x = 1200 \cdot \frac{12}{8} \cdot \frac{3}{5} = 1200 \cdot 1.5 \cdot 0.6 = 1080
Both relationships are direct, so no ratio is flipped.

Check: each machine makes 1,200 ÷ (8 × 5) = 30 parts a day. So 12 machines in 3 days make 12 × 3 × 30 = 1,080 parts. The result is also reasonable: there are more machines but far fewer days, and the drop in days weighs a little more.

Worked example: 10 workers, working 6 hours a day, finish a job in 18 days. How many days do 15 workers, working 8 hours a day, need for the same job?

  1. Unknown: days. Known value: 18.
  2. Workers and days: more workers, fewer days (inverse). Flipped ratio: 10/15.
  3. Hours per day and days: more hours per day, fewer days (inverse). Flipped ratio: 6/8.
  4. Multiply the known value by both ratios.
x=18⋅1015⋅68=18⋅23⋅34=9x = 18 \cdot \frac{10}{15} \cdot \frac{6}{8} = 18 \cdot \frac{2}{3} \cdot \frac{3}{4} = 9
Both relationships are inverse, so both ratios are flipped.

Check with total labor hours (person-hours): 10 × 6 × 18 = 1,080 and 15 × 8 × 9 = 1,080. The total work is the same, as it should be, and the job finishes sooner because more people work longer days.

When the rule of three does not apply

Not every relationship between two quantities is proportional. Age and height grow together, but a 4-year-old is not twice as tall as a 2-year-old. The area of a square is not proportional to its side either: a square with 2 in sides has an area of 4 in², and one with 4 in sides has 16 in². The side doubled and the area quadrupled. A naive rule of three would say 8 in², half the right value.

Another classic case is a price with a fixed part, like a taxi ride with a base fare: doubling the distance does not double the fare, because the base fare is charged only once. Before setting up the proportion, make sure the relationship really is proportional.

Common mistakes

  1. Deciding direct or inverse by looking at everything at once. In a compound problem, compare each quantity only with the unknown, holding the rest fixed.
  2. Cross-multiplying an inverse relationship. For inverse proportions, set the products equal or flip the ratio.
  3. Using the rule of three where there is no proportion, such as area and side, or prices with a fixed fee.
  4. Mixing units: hours with minutes, ounces with pounds. Convert everything first.
  5. Not checking whether the answer makes sense. Fewer people finishing faster is a sign of a wrong setup.

Frequently asked questions

How do I know if a rule of three is direct or inverse?

Imagine one quantity doubles. If the other doubles too, it is direct. If it halves, it is inverse. If it changes some other way, it is not proportional.

Do I cross-multiply in an inverse rule of three?

No. In an inverse relationship the product is constant, so you set the products equal: 6 · 10 = 4 · x, so x = 15.

In a compound rule of three, does the order of the ratios matter?

No. Multiplication is commutative, so the order of the ratios does not change the result. What matters is deciding, for each quantity, whether its ratio goes in as is or flipped.

Is every relationship between quantities proportional?

No. The area of a square is not proportional to its side (doubling the side quadruples the area), and prices with a fixed fee are not proportional either. In those cases the rule of three gives a wrong answer.